CAUTION:
Be sure you read the CNC SHOP - PRODUCT LICENSE INFORMATION after installing.

CNC Shop-Mill library must be used with NoteTab Light or the Pro version.  NoteTab is a leading-edge text editor.  The CNC Clip Library will work with both versions on NoteTab with no loss of function.  NoteTab Light is 100% freeware.

To Install CNC Shop into NoteTab Light/Pro:

After NoteTab is installed,
Install the following into:
C:/Program Files/NoteTab/Libraries/
or
C:/Program Files/NoteTab Pro/Libraries/

CNC Articles.otl
CNC Information.otl
CNC Shop-Mill.clb
CNC Shop-Mill.ctb
CNCUsers.ini
IXOYE.txt
Key Concepts.otl

  After Installition run NoteTab, click on the CNC Shop-Mill tab at the bottom of the NoteTab screen.  A left side bar will open with CNC Shop-Mill in it.  Double click on any item to display it.

 1999-2002 CNC Shop Port Clinton, Ohio
http://www.cros.net/jcerbus/cncshop/
Email: webmasterjmc@cros.net